PROJ-FILE-FMT=2              	; MANDATORY this must be the first line.   

PROJ-NAME='Factory Defaults'    	; MANDATORY single quoted text up to 32 bytes
PROJ-DRIVER-REV='Rev A'    		; MANDATORY number for pre-release, letter for release

DOC-REV-USER-MESSAGE['Rev A'] = "3/19/2003 PAB - Initial Revision."

IR-TIME-0L=1.315m					; MANDATORY special 0 or 1 on/off pairs
IR-TIME-0H=420u			 
IR-TIME-1L=315u
IR-TIME-1H=695u

CODE-SUBST[PREAMBLE]="%0100000000000100000000010001001000000000"	; OPTIONAL single quoted replacement string for codes
CODE-SUBST[AGC]="D3470u,d1740u"	 									; OPTIONAL single quoted replacement string for codes

PROJ-BAUD-RATE=9600,8,N,1

VOL-MUTE=0
VOL-RANGE=205
VOL-FLOOR=50

; CODE FLAGS
;	 RSCODE='...'				
;  	 REPEATS=X 		 			OPTIONAL, default = 0 = REPEAT ON KEYDOWN - NOT WORK FOR VOLUME
;    IS-SELECTION 				OPTIONAL, allows code to be used in selection pull down
;    IS-HIDDEN 					OPTIONAL, allows code to be used in hidden function pull down
;    USEREPEAT                  OPTIONAL, attaches repeat code to string (deprecated)
;	 USEPREFIX           		OPTIONAL, attaches suffix code to string (deprecated)
;    USESUFFIX					OPTIONAL, attaches prefix code to string (deprecated)
;	 INCLUDECONT				OPTIONAL, include continuations in repetitions
;	 CONTINUE='X'				OPTIONAL, continuation code
; VALUES (mutually exclusive)
;	 RS232="..."				RS232 CODE 
;	 IR="..."					IR CODE

RSCODE['S-VIDEO']	="$2,'S-Video',$3",											IS-SELECTION
RSCODE['RGB 1']		="$2,'RGB 1',$3",											IS-SELECTION
RSCODE['RGB 2']		="$2,'RGB 2',$3",											IS-SELECTION
RSCODE['POWER ON']	="$2,'Smart',$3"					
RSCODE['POWER OFF']	="$2,'Panel',$3"
RSCODE['VOLUME']	="$2,'AVL:0',&VBIN,2,$3"
RSCODE['POWER POLL']="'POLL',10,13"
RSCODE['COMP 1']	="'SOURCE 11',13,d250m,27,&VASC1,&VASC2,&VASC3,&VBIN,25",	IS-SELECTION
IRCODE['MENU']		="AGC,PREAMBLE, %01011110010011010,d35m,d35m",				IS-HIDDEN
IRCODE['MENU UP']	="%01111000,&QSTOP,d320u,%10110",							IS-HIDDEN
IRCODE['ENTER']		="AGC,PREAMBLE,%01001110010111010,d70m",					IS-HIDDEN
IRCODE['ADJ UP']	="AGC,PREAMBLE,%01011010010010010,d70m",					IS-HIDDEN
IRCODE['ADJ DOWN']	="AGC,PREAMBLE,%11011010110010010,d70m",					IS-HIDDEN
IRCODE['ADJ LEFT']	="AGC,PREAMBLE,%00111010001010010,d70m",					IS-HIDDEN
IRCODE['ADJ RIGHT']	="AGC,PREAMBLE,%10111010101010010,d70m",					IS-HIDDEN
IRCODE['MUTE']		="AGC,PREAMBLE,%10001001100110100,d70m",					IS-HIDDEN
IRCODE['FREEZE']	="AGC,PREAMBLE,%01000000010100110,d70m",					IS-HIDDEN
IRCODE['REPEAT']	="AGC,PREAMBLE,%01000000010100110,d70m",					IS-HIDDEN

; POWER Polling Section MANDATORY IF 

POWER-POLL-INTERVAL=1s				; FREQUENCY
POWER-POLL-TIMEOUT=6s				; TIME TO WAIT FOR RESPONSE - TIMEOUT = FAIL (>0)
POWER-POLL-THRESHOLD=5				; NUMBER OF FAILURE BEFORE ASSERING POWER FAIL
POWER-POLL-STARTBYTE=5				; BYTE TO TEST
POWER-POLL-MATCH-ANY=FALSE 			; 
POWER-POLL-MATCH-BYTES="'12',13"		; 16 MAX ALLOWED
POWER-POLL-DURING-WARMUP=FALSE
POWER-POLL-DURING-LOCKOUT=FALSE
;POWER-POLL-TESTBYTE-MASK=$01		; SET TO FF IF NOT USED

; MANDATORY 

WARM-UP-DELAY=5s 						; TIME TO TURN ON WARM UP LIGHT COSMETIC ONLY
POWER-ON-DELAY=2s 						; RESORTATION OF SELECTION
DEFAULT-LOCKOUT=5s						; 
IO-DOWNTIME=100m 							; 29MS PER BIT
IO-CANCEL-DOWNTIME-ON-RX=FALSE			; 
USE-MODULATION-WHEN-WIRED=FALSE 		;
INVERT-LINE-WHEN-WIRED=TRUE	        	;
CARRIER-PERIOD=25u						; 
CARRIER-DUTY-CYCLE=50					; DEFAULTS TO 50%
PROJ-USES-ABSOLUTE-VOL=TRUE 
IR-WIRING-OPTIONS=IR-Emitter,Wired-Serial
POWER-SENSE-OPTIONS=RS232POLL,SENSOR,NONE
PROJ-MISSING-THRESHOLD=10          ; NUMBER OF TIMEOUTS - ONLY USED WHEN PROJ IS POLLING AND TELLS 1 - 255
ROOM-POWER-SENSE-SELECTED=NONE
; FIRMWARE FOIBLES
BYTES-TO-QUEUE=2                        ; 

; Section for setting the defaults of the hidden functions

DEFAULT-HID-FUNCT[OFF]		='MENU'						; OPTIONAL
DEFAULT-HID-FUNCT[VUP]		='ADJ UP'					; OPTIONAL
DEFAULT-HID-FUNCT[VDN]		='ADJ DOWN'					; OPTIONAL
DEFAULT-HID-FUNCT[1]		='MUTE'						; OPTIONAL
DEFAULT-HID-FUNCT[2]		='ENTER'					; OPTIONAL
DEFAULT-HID-FUNCT[3]		='ADJ LEFT'					; OPTIONAL
DEFAULT-HID-FUNCT[4]		='ADJ RIGHT'				; OPTIONAL

; MANDATORY Section for setting the defaults of the CORE functions

DEFAULT-CORE-FUNCT[ON]		='POWER ON'               	; MANDATORY
DEFAULT-CORE-FUNCT[OFF]		='POWER OFF'               	; MANDATORY
DEFAULT-CORE-FUNCT[POLL]	='POWER POLL'              	; MANDATORY
DEFAULT-CORE-FUNCT[VUP]		='VOLUME'              		; MANDATORY
DEFAULT-CORE-FUNCT[VDN]		='VOLUME'              		; MANDATORY
DEFAULT-CORE-FUNCT[REPEAT]	='REPEAT'					; OPTIONAL
;DEFAULT-CORE-FUNCT[PREFIX]	=''							; OPTIONAL
;DEFAULT-CORE-FUNCT[SUFFIX]	=''							; OPTIONAL

; MANDATORY Section for setting the defaults of the selections

DEFAULT-SELECTION[1]		='S-VIDEO'					; MANDATORY
DEFAULT-SELECTION[2]		='RGB 1'				 	; MANDATORY
DEFAULT-SELECTION[3]		='RGB 2'					; MANDATORY
DEFAULT-SELECTION[4]		='COMP 1'					; MANDATORY

; Documentation Section

DOC-PROJ-232-CONNECTOR=DB9F 
DOC-PROJ-232-WIRING[2]=RX
DOC-PROJ-232-WIRING[3]=TX
DOC-PROJ-232-WIRING[5]=GND
DOC-PROJ-232-WIRING[7]=8
DOC-INSTALLATION-NOTE[1]="This is a dummy driver that is not to be used in an installation. You need to select the appropriate driver for the device that you are controlling."   ; there can be several of these

;REQUIRES-FW-VERSION=$0,$d6